Devolo MicroLink ISDN Router Spécifications télécharger pdf (Page 12)

Connection and installation

devolo MicroLink ISDN Router & MicroLink dLAN ISDN Router

It is important to always start the router before the computers so that the

computers can receive their TCP/IP configuration from the router's DHCP

server while booting.

As each of the RJ45 sockets also functions as an uplink port, you may connect

either a computer or an additional switch (hub) to any of the four ports to link

more than four computers. Thanks to Auto MDI/X, you can use either cross

over or normal cables. An LED labeled 'Link/Act' will be lit on the front panel

for every computer or every network device which is connected and powered

up.

For information on configuring the MicroLink (dLAN) ISDN Router, please see

the following Chapter

“Router configuration” on page 15.

2.3 Networking examples

햲 Networking of multiple workstations; Internet access via the MicroLink

ISDN Router

Ethernet

NTBA

ISDN

MicroLink ISDN

Router

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 38 39

Pas de commentaire

Devolo MicroLink ISDN Router Spécifications Page 12